these speakers can handle peaks of 100watts great for vocals.
Showing posts with label Homemade. Show all posts
Showing posts with label Homemade. Show all posts
Monday, April 29, 2013
Home-made outdoor speakers
Home-made outdoor speakers Tube. Duration : 1.20 Mins.
these speakers can handle peaks of 100watts great for vocals.
these speakers can handle peaks of 100watts great for vocals.
Tuesday, December 18, 2012
Homemade Lightweight Beach/Boombox
Homemade Lightweight Beach/Boombox Tube. Duration : 4.88 Mins.
Howdy thar, this is my little project i made for the summers beach evnings and picknicks. Had all the stuff home except the amp. But got it @ a store called Kjell&CO (in sweden) for like 20euro or 25 usd So the box is made of cheap parts. 1x Denver 200W Speakers 2x Bosh 12v 2Ampere Cordless drill batteries 1x Amp 40w 1x processor fan and the box ofc The box stays alive with good bass for about 5hours, then u need to lower the volyme a bit so the sound wont get "grötigt" as we call it in sweden.
Howdy thar, this is my little project i made for the summers beach evnings and picknicks. Had all the stuff home except the amp. But got it @ a store called Kjell&CO (in sweden) for like 20euro or 25 usd So the box is made of cheap parts. 1x Denver 200W Speakers 2x Bosh 12v 2Ampere Cordless drill batteries 1x Amp 40w 1x processor fan and the box ofc The box stays alive with good bass for about 5hours, then u need to lower the volyme a bit so the sound wont get "grötigt" as we call it in sweden.
Friday, November 2, 2012
Waldo's Homemade Heavy Metal Steam Punk Guitar
Waldo's Homemade Heavy Metal Steam Punk Guitar Video Clips. Duration : 8.57 Mins.
This guitar is made entirely from recycled materials. Solid brass except for the fret-board, which is from a mahogany pallet I received some product on from the Phillipines. The brass ball of the body is what I believe was a kerosene lantern base in it's past life. The three brass tubes forming the neck were chandelier parts and a telescoping leg from an old brass camera tripod that never fit a single camera I ever owned. The center tripod tube with it's "horn" extends over 3 feet and has various attachments including an arrow-head finial from an old lamp for roasting hotdogs on the campfire. The two tuners on the head are old valves as is the tuner on the tail end. The three tubes are joined using an old brass pipe strap and the angle was achieved using 2 fittings from a 50's era goose-neck lamp. The nut and frets are brazing-rod stubs that I always save. The "soundboard" is an old door escutcheon-plate and the round "hand-rest" valve handle was part of the original kerosene lamp. The bridge is an old brass key. The fancy decorative brass valves and tubes were at one time gas-light fixtures salvaged from old homes. The large horn "speaker" was the top of a brass outdoor light fixture, the smaller horns were once candle holders. The "speed-contol" is from a long gone victrola record player and it is mounted onto an old door-bell escutcheon. The pick-up is a speaker from a 1961 "Archer" walkie-talkie. The wires from it are copper shielded wire cut-offs from low-voltage ...
This guitar is made entirely from recycled materials. Solid brass except for the fret-board, which is from a mahogany pallet I received some product on from the Phillipines. The brass ball of the body is what I believe was a kerosene lantern base in it's past life. The three brass tubes forming the neck were chandelier parts and a telescoping leg from an old brass camera tripod that never fit a single camera I ever owned. The center tripod tube with it's "horn" extends over 3 feet and has various attachments including an arrow-head finial from an old lamp for roasting hotdogs on the campfire. The two tuners on the head are old valves as is the tuner on the tail end. The three tubes are joined using an old brass pipe strap and the angle was achieved using 2 fittings from a 50's era goose-neck lamp. The nut and frets are brazing-rod stubs that I always save. The "soundboard" is an old door escutcheon-plate and the round "hand-rest" valve handle was part of the original kerosene lamp. The bridge is an old brass key. The fancy decorative brass valves and tubes were at one time gas-light fixtures salvaged from old homes. The large horn "speaker" was the top of a brass outdoor light fixture, the smaller horns were once candle holders. The "speed-contol" is from a long gone victrola record player and it is mounted onto an old door-bell escutcheon. The pick-up is a speaker from a 1961 "Archer" walkie-talkie. The wires from it are copper shielded wire cut-offs from low-voltage ...
Subscribe to:
Posts (Atom)